As the holiday season approaches, it’s time to wrap up the year on a high note and prepare your print shop for a well-deserved Christmas break. To ensure a smooth return to business, proper maintenance of your Ecofreen Mister-T2 Pre Treater Machine and Epson SureColor F2260 or F2160 DTG Printer is crucial. Here’s a handy guide to help you bid farewell to 2023 on a maintenance-savvy

note.

1. Ecofreen Mister-T2 Pre Treater Machine:

Cleaning:

Before closing shop, thoroughly clean the pre treater nozzles, spray tips, and the entire system. Remove any leftover solution to prevent clogs and ensure optimal performance upon your return.

Flush the System:

Flush the system with a cleaning solution to prevent any residual pretreatment from drying up and causing blockages during the downtime. Follow the manufacturer’s guidelines for the appropriate cleaning solution.

Check Fluid Levels:

Ensure that the pretreatment fluid levels are adequate. If necessary, top up the fluid reservoir to prevent any potential damage caused by low levels.

2. Epson SureColor F2260/F2160 DTG Printer:

Not using your printer for one to two weeks:

Replace the white ink with cleaning cartridges to avoid clogged lines. Menu > Maintenance > Replace White Ink (Two cleaning cartridges are required). After the procedure is complete, DO NOT turn the machine off.

Not using your printer for MORE than two weeks:

You must place the machine in Storage Mode. Menu > Maintenance > Storage Mode (Seven cleaning cartridges required). After the procedure is completed, turn the machine off.

When the machine is restarted, you will need to load all inks - Full CMYK and White cartridges required.

Nozzle Check and Cleaning:

Perform a thorough nozzle check and cleaning to maintain print quality. Follow the printer’s manual for the correct procedure. If any clogs are detected, address them before shutting down.

Cap the Printheads:

If your printer has a capping station, cap the printheads to prevent them from drying out. Use a cleaning solution compatible with your printer to avoid damage.

General Tips:

Secure the Environment:

Ensure the printer and pre-treater are stored in a clean, dust-free environment. Cover the machines to protect them from dust and environmental contaminants.

Schedule Regular Maintenance:

Consider creating a regular maintenance schedule throughout the year to keep your machines in optimal condition. This will make year-end preparations more manageable.

By investing time in proper maintenance before closing down for the Christmas break, you not only protect your equipment but also set the stage for a seamless return to production in the new year. Happy holidays and see you in 2024, ready to conquer new printing heights!